3b7914ff78576517ae8b8e86210ac6b3

Микросхема SN74HCT374N, 8-битный D-триггер с тремя состояниями на …

Поставка электронных компонентов в Смоленск

23,52 руб.

x 23,52 = 23,52
Сроки поставки выбранного компонента в Смоленск уточняйте у нашего менеджера
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №110-12 дней23,52руб.21,87руб.21,17руб.20,70руб.19,29руб.18,82руб.18,35руб.16,93руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №25-7 дней42,57руб.39,04руб.38,34руб.37,40руб.34,81руб.34,10руб.33,16руб.29,87руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №35 дней55,04руб.50,80руб.49,63руб.48,45руб.45,16руб.43,98руб.43,04руб.38,57руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №47-10 дней28,22руб.25,87руб.25,40руб.24,70руб.23,05руб.22,58руб.21,87руб.19,76руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №55 дней54,33руб.50,10руб.48,92руб.47,75руб.46,33руб.44,69руб.42,34руб.38,10руб.

Характеристики

SN74HCT374N, 8-битный D-триггер с тремя состояниями на …The SN74HCT374N is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. On the positive transition of the clock input, the Q outputs are set to the logic levels that were set up at the data (D) inputs. An OE input places the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

• High-current 3-state true outputs can drive up to 15 LSTTL loads
• Inputs are TTL-voltage compatible
• Full parallel access for loading
• 80µA Maximum low power consumption
• 22ns Typical tpd
• ±6mA Output drive at 5V
• 1µA Maximum low input current